DNA-HRP/聚M-酪氨酸共修饰电极的制备及其电化学性能的研究

以聚L-酪氨酸膜为载体,固载DNA和辣根过氧化物酶(HRP)制备过氧化氢生物传感器.该传感器对H2O2表现出良好的催化还原特性,具有灵敏度高,稳定性好且易于制作等特点.其线性响应范围为:2.0×10-6～1.1×10-2 mol/L,检出限为8.0×10-7 mol/L (S/N=3).     

Kinetics and mechanism of gold dissolution in thiourea solutions: Effect of sulfide ions

Chronoamperograms for gold in solutions containing 0.1 M thiourea, 0.5 M H₂SO₄, and catalytically active sulfide ions at the concentration c ₁ from 1 × 10^?5 to 4 × 10^?5 M are obtained at different potentials with the aid of an automated setup intended for renewing the electrode surface directly in the solution by cutting off a thin surface layer of the metal. It is shown that the results of measurements of the current practically coincide at a constant value of the product c ₁ t, where t is the time period elapsed after the renewal of the electrode surface. Such a coincidence testifies to a diffusion nature of processes that hamper accumulation of sulfide ions at the gold surface. This fact permitted the use of a procedure developed previously for the calculation of polarization curves at constant values of surface coverage θ by catalytically active ions. At θ = const, the voltammetric curves for gold in sulfide-containing thiourea solutions are shown to correspond to the Tafel equation. With the surface coverage increasing, the effective values of the exchange current i ₀, transfer coefficient α, and anodic reaction order with respect to thiourea P _a increase from the values i }~ 10^?5 A cm^?2, α }~ 0.12, and P _a = 0.2, which are characteristic of pure solutions, to 2 × 10^?4 A cm^?2, α }~ 0.5, and P _a = 1.1 (at θ }~ 0.5). An interpretation to the established regularities is given.     

过氧化氢氧化酸碱滴定法测定苯甲醛的含量

本文提出和建立了一种分析醛类化合物的方法，并用此方法测定了分析纯苯甲醛的含量为９９．４％，相对标准偏差为０．２１％，实验苯甲醛中所带的寻质苯甲醇以及乙醇，甲醇均不干扰测定，苯甲酸的干扰可以扣除，本法操作简单，终点易于掌握，推广应用方便。     

High-Pressure Synthesis and Crystal Structure of B2S3

Two new high-pressure phases of binary boron-sulfur compounds, B₂S₃-II and B₂S₃-III, were synthesized at 3-6.2 GPa. A single crystal of B₂S₃-III was grown and the structure was determined (tetragonal, space group I4₁/a, a=16.086(2) Å, c=30.488(4) Å; V=7888(1) ų, Z=100, R=3.0% and R_w=2.8% for 3047 observed data [I>3.00σ(I)]. The structure of B₂S₃-III consists of two kinds of macrotetrahedra built up from 20 and 34 BS₄-tetrahedra. These macrotetrahedra connect each other to form an interpenetrating zincblende-type structure by sharing BS₄-tetrahedra at the corners of those. B₂S₃-III is anticipated having a rather disordered structure. From the UV-Vis diffuse reflectance spectrum, the optical band gap of B₂S₃-III was estimated to be 3.7 eV.     

Carbon dioxide reduction under visible light: a comparison of cadmium sulfide and titania photocatalysts

1. Download : Download high-res image (135KB)
2. Download : Download full-size image

     

Electrochemical characteristics of a platinum electrode modified with a matrix of polyvinyl butyral and colloidal Ag containing immobilized horseradish peroxidase

A new hydrogen peroxide biosensor was constructed, which consisted of a platinum electrode modified by a matrix of polyvinyl butyral (PVB) and nanometer-sized Ag colloid containing immobilized horseradish peroxidase (HRP), and using Co(bpy)₃³⁺ as mediator in the hydrogen peroxide solution. The electrochemical characteristics of the biosensor were studied by cyclic voltammetry and chronoamperometry. The modified process was characterized by electrochemical impedance spectroscopy and cyclic voltammetry. The HRP immobilized on colloidal Ag was stable and retained its biological activity. The sensor displays excellent electrocatalytic response to the reduction of H₂O₂. Analytical parameters such as pH and temperature were also studied. Linear calibration for H₂O₂ was obtained in the range of 1×10^–5 to 1×10^–2 M under optimized conditions. The sensor was highly sensitive to H₂O₂, with a detection limit of 2×10^–6 M, and the sensor achieved 95% of steady-state current within 10 s. The sensor exhibited high sensitivity, selectivity and stability.     

疏水分配常数用于反相液相色谱保留值的预测

在反相液相色谱保留值基本方程log k_′=a+_cC_B的基础上,描述了采用疏水分配常数及氢键作用能来预测a、c参数的方法,并系统讨论了疏水分配常数对参数a、c的影响,借此对反相液相色谱宽浓度范围内的保留值进行了预测。     

Separation behaviors of xylenol isomers by gas chromatography with helps of hydrogen bonding

Summary Xylenol isomers can be resolved on most polyols (sugars or sugar alcohols) and polyethers (polyethylene glycol or polypropylene glycol) with hydrogen-bonding interaction. They are separated on vinical polyols which have more hydroxy hydrogen than tetrol, and even on vicinal triol when its hydroxy hydrogen is acidic (stronger proton donor). The stronger is the hydrogen bonding interaction between xylenols and the liquid phase, the better is the separation of 2,4- and 2,5-xylenol, and the poorer the separation of 2,4-and 2,3-xylenol.     

H原子与CH3NH2抽氢反应的动力学计算

用QC ISD(T)/6-311 G(3DF,3PD)/MP2/6-311G(D,P)方法研究了H原子与CH3NH2的抽氢反应过程。该反应包含两个反应通道:H分别从CH3基团(R1)和NH2(R2)基团上抽氢。R1势垒比R2势垒低3.42kJ/mol,表明R1是主反应通道。在从头算的基础上,用变分过渡态理论(CVT)加小曲率隧道效应(SCT)研究了各反应温度范围为200~4000K内的速率常数,所得结果与实验值符合的很好。动力计算表明,在所研究的温度范围内,变分效应对速率常数的计算影响不大,而在低温范围内,隧道效应起了很重要的作用。     

芥子气模拟剂2-氯乙基乙基硫醚的光催化降解

利用连续流动微反、原位红外和GC/MS等手段考察了芥子气模拟剂2-氯乙基乙基硫醚（2-CEES）在P25 TiO2上的光催化降解反应,证实CO2和H2O是这个反应的最终产物.详细的跟踪分析表明,除了CO2和H2O外,在反应的气相混合物中可检测到C2H4、CH3CHO、CH4、CO、HCl和H2S；少量小分子的羧酸、醚和砜；微量C2H5SC2H5、C2H5S2C2H5、C2H5SC2H4Cl和CH2ClCH2Cl等中间产物;在反应后的催化剂表面可检测到C2H5S2C2H5、C2H5SC2H4OH、C4H9S2C2H5和C2H5S2C2H4OH、等物.根据这些结果提出了2-CEES光催化降解的反应机理,推断2-CEES的光催化降解涉及脱氯、C－S键断裂、有机硫化物光聚合和裂解等复杂过程最终转化为CO2和H2O.认为各种硫物种在表面的积聚引起了催化剂的缓慢失活.